Fluke 2AC Non-Contact Voltage Tester
Fluke 2AC Non-Contact Voltage Tester is rated out of 5 by 46.
Key features
Designed to be pocket-sized and easy to use. Suitable for a wide range of residential, commercial and industrial needs
- Non-contact voltage detection from 90 to 1000 V AC
- Innovative 'Battery Check' ensures battery is in good condition*
- Integrated clip design, optimized for pocket storage
- CAT IV 1000 V overvoltage rated product for best in class user protection
* Use of Battery Check function is optional and for convenience only, it is not intended as a substitute for checking the unit on a known live source before and after use.
Product overview: Fluke 2AC Non-Contact Voltage Tester
Fluke 2AC Non-Contact Voltage Tester - Always on for faster, safer voltage testing
Fluke 2AC is the latest addition to the VoltAlert™ AC non-contact voltage tester family. This voltalert tests for energized circuits and defective grounds, whether it's for an electrician on the factory floor or the do-it-yourselfer around the house. The tip of the pocket-sized volt alert tester will glow red when within close proximity of an outlet, terminal strip, or power cord where voltage is present.
Additional Fluke 2AC Non-Contact Voltage Tester features:
- Integrated clip design, optimized for pocket storage
- Powered by 2x AAA batteries (included)
- Two-year warranty
Specifications: Fluke 2AC Non-Contact Voltage Tester
| Specifications | |
| Operating Principles | Senses the steady state electrostatic field produced by AC voltage through insulation without requiring contact to the bare conductor. A red glow at the tip indicates the presence of voltage. |
| Safety Compliance | Meets IEC 61010-1:2001, UL 61010-1 (2nd ed.), CAN/CSA-C22.2 No. 61010-1-04, and ISA-82.02.01 Pollution Degree 2 |
| EMC Compliance | Meets IEC 61326-1:2006 |
| Operating | 90 V AC to 1000 V AC, CAT IV 1000 V rated |
| Temperature (Operating and Storage) | -10°C to 50°C (-14°F to 122°F) |
| Operating Humidity Ranges | 0% to 95% (0°C to 30°C) |
| 0% to 75% (30°C to 40°C) | |
| 0% to 45% (40°C to 55°C) | |
| Altitude | 2000 m (CAT IV 1000 V) |
| Cleaning | Clean with damp cloth |
| Battery Life | Typical battery life of greater than one year |
| Warranty Period | Two years |
Models: Fluke 2AC Non-Contact Voltage Tester
FLK2AC/90-1000V
Fluke 2AC VoltAlertTMElectrical Tester
90-1000V, straight tip for North American style outlets
90-1000V, straight tip for North American style outlets
Rated 5 out of 5 by Sparkone from Solid tester. Always on and ready to fast test. Rhis tester is simply the best for me. I work in noisy generation environment and without this is not possible to identify power presence. Its suitable for industrial use as all you need is speed and the light the buzzer won't be much use for me! as machines are too loud you ate at home then you may need a volt stick that sounds. I tried kewtech but it failed so a reliable fluke is what you need at busy times! It could be a little longer (taller) becouse the voltages are too high at times but you can use it with an extension pole so easy of use then nakes to 4 stars not 5 !
Date published: 2023-10-25
Rated 5 out of 5 by pewpew from Very good I personally prefer the no beep and the beep is useless where I work anyways. Just make sure you test your tester before testing a wire to ensure it is functional. The only false positive I've gotten was from induced voltage, and no false negatives unlike the Milwaukee one I've used. Beep is subjective and I like not having it!
Date published: 2023-10-21
Rated 1 out of 5 by Laser from DANGEROUS No Audible alert! Twice I've almost been electrocuted because I couldn't see the light at the tip, in the sun. I don't understand why there is no audible setting? Very dangerous for an electrician or do-it-yourselfer!
Date published: 2023-06-17
Rated 3 out of 5 by tim m from test button Unit works well but not the test button. Came out on it s own not sure how. I fountd it the first time and put it back in. Gone on the second time.
Date published: 2023-02-21
Rated 1 out of 5 by Tony13 from Brand New Inoperarative I purchased the Fluke 1AC II Non-contact 1000 Amp 1000-Volt LED Voltage Tester It was on special and I paid $36 plus the tax. I took it out of the package tested it and it work great. I store it in my tool box. Close to a year my lights when out at home and I wentt to go use it. It did not work ! I purchase new AAA betteries and when I put them in a red light comes on with a loud screaming beep and it will not turn off !!! I paid cash for it . A waste of money and truly disappointed!!!
Date published: 2023-01-21
Rated 5 out of 5 by Axel v from Excellent NCV Tester Excellent tool, precise readings even with multiple circuits on same box!.
Date published: 2022-12-23
Rated 4 out of 5 by Bwood12 from Constantly blinks Just got this tester and it constantly blinks every time I touch it.. i could see it blinking in the bag when it arrived. Anyway to fix this is
Date published: 2022-11-21
Rated 5 out of 5 by Java from Great product Great product, use it everyday at my job. Wouldn’t do an install without it!
Date published: 2022-06-19