Fluke 28 II Rugged Digital Multimeter
Model#: Fluke 28 II Part#: 3301271 UPC#: 0 95969 46171 9
Fluke 28 II Rugged Digital Multimeter is rated out of 5 by 15.
Key features
- IP 67 waterproof & dustproof protection, completely sealed for use in harsh environments
- Designed to withstand 3 meter drop (with holster)
- Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
- MSHA approval
- Limited lifetime warranty
In stock
$699.99
Product overview: Fluke 28 II Rugged Digital Multimeter
The standard for rugged
The Fluke 28 II digital multimeter defines the standard for operating in harsh conditions with the features and accuracy to troubleshoot most electrical problems. The meter offers an IP 67 (waterproof and dustproof) rating, MSHA approvals, extended operating temperature range of -15 °C to +55 °C (5 °F to 131 °F, -40 °C for up to 20 minutes) and 95% humidity, and has been designed and tested to withstand a 3 m (10 ft) drop. The Fluke 28 II Rigged Digital Multimeter is built to work in the toughest environments.
Other key capabilities
- Measure up to 1000 V AC and DC
- Measure up to 10 A (20 A for 30 seconds)
- 10,000 μF capacitance range
- Frequency to 200 kHz
- Extended AC voltage bandwidth– 15 Hz to 20 kHz
- Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
- Resistance, continuity and diode test
- Min/Max and average recording to capture variations automatically
- Peak min-max
- Hi resolution 20,000 count display mode
- True-rms ac voltage and current for accurate measurements on non linear signals
- Backlit keypad buttons allow for easy visibility in low-lit areas
- Large display digits and 2 level bright white backlight for increased visibility
- Reversible holster for added protection when not in use
- Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits and complies with second edition IEC and ANSI electrical safety standards
- Long battery life (800 hours)
- Relative mode to remove test lead resistance from low ohms measurements
- Auto and manual ranging for maximum flexibility
- Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks
What's in the box:
- Fluke 28 II Rugged Digital Multimeter
- (1 pair) TL75 test leads
- (1 pair) AC175 alligator clips
- 80BK-A type-K thermocouple leads
- Quick reference guide
Specifications: Fluke 28 II Rugged Digital Multimeter
| Accuracy Specifications | ||
| DC voltage | Range | 0.1 mV to 1000 V |
| Accuracy | 0.05% + 1 | |
| AC voltage | Range | 0.1 mV to 1000 V |
| Accuracy | 0.7% + 4 | |
| DC current | Range | 0.1 μA to 10 A |
| Accuracy | 0.2% + 4 | |
| AC current | Range | 0.1 μA to 10 A |
| Accuracy | 1.0% + 2 | |
| Resistance | Range | 0.1 Ω to 50 MΩ |
| Display counts | 6000 | |
| Capacitance | 1 nF to 9999 μF | |
| Frequency | 0.5 Hz to 199.99 kHz | |
| Temperature | -200°C to +1090°C | |
| Low pass filter (Measurement on VSD’s) | Yes | |
| Compliance | CAT IV 600 V , CAT III 1000 V | |
| IP rating | IP 67 | |
| Power | Three AA batteries | |
| Battery life | 800 hours | |
| General Specifications | ||
| Display | Bar graph/backlight | Yes/Yes |
| Data storage | Peak transient capture | 250 μS |
| Min/Max/Avg | Yes | |
| Reading hold | Yes | |
| Other features | Relative readings (zero) | Yes |
| Battery type | Three AA batteries | |
| Warranty and protection | Safety rating | CAT IV 600 V/CAT III 1000 V |
| Mine safety | MSHA Approved | |
| External protection | Rubber holster | |
| Drop test | 10 feet drop test | |
| Dustproof/waterproof | Yes, IP 67 rated | |
| Warranty | Limited lifetime | |
| Size (H x W x L) with holster | 6.35 x 10.0 x 19.81 cm (2.5 x 3.93 x 7.8 in) | |
| Weight with holster | 698.5 g (1.54 lb) | |
Models: Fluke 28 II Rugged Digital Multimeter
Fluke 28 II
Fluke 28 II Rugged Digital Multimeter
Part#: 3301271UPC#: 0 95969 46171 9
- TL75 test leads
- AC175 alligator clips
- 80BK-A type-K thermocouple leads
Rated 2 out of 5 by CANUSER from Fluke 28II has LCD Issues The LCD screen on my 28II meter has never been great.
All of the photos on the website show the meter's numerical displays to be dark and crisp. However, in reality (at least with my meter), in DC Voltmeter mode, the V and DC in the upper right of the screen are barely visible. In AC Voltmeter mode, the V is barely visible, but the AC is dark and crisp. In Ohmmeter mode, the Ohm Symbol and the k for kiloohm are barely visible. The M for megaohm, however, is dark and crisp. The bar graph is dark and crisp, Manual is dark and crisp, but Auto is barely visible. In temperature mode, the degrees C is dark and crisp, but the degrees F is barely visible. The middle segments of the 7-segment numerical displays are often barely visible as well, and the other segments are variable in their display.
Date published: 2022-11-23
Rated 2 out of 5 by mule1812 from Great meter, useless battery design I purchased this unit approximately one year ago it has performed flawlessly and reliably.
Working in remote areas I thought it prudent to read the manual for battery replacement. Manual states that you require AA batteries and Phillips head screwdriver, imagine my surprise when the batteries fail and I go to replace them and find that the screws in the manual referred to as Phillips head are a specialised type screw which no sane person would carry in their toolbox. Being 150km from the nearest town with a hardware store that was the end off the days work being unable to test the solar setup.
Getting home I find in my toolkit a torque head that fits this unusual screw, opening the compartment I find a battery holder that Quasimodo on a sad day would have designed. Seriously if that’s the best you could come up with you need to fire the person responsible and hire someone from kindergarten.
Date published: 2020-06-11
Rated 5 out of 5 by berge504 from DURABLE!!! This meter lasted a ship reck and 4 days in brackish water and still works!!! Love this thing and I couldn't talk more highly about it.
Date published: 2019-02-06
Rated 5 out of 5 by JDnAL from Rugged As All Get Out!! As much as my tools get abused this meter was a must have, and it's proven its worth every time my clumsy self drops it or gets it wet.
Date published: 2017-01-19
Rated 5 out of 5 by joe2 from Safe Meter I bought this meter about a year ago and liked its safety features Readings were quick and stable. A big plus is It uses three AA alkaline batteries that can last up to 600 hours.
The unit is packed with a pair of PVC test leads that does not plug into the meter easily, it requires a lot of force to get them seated properly. This premium Fluke multi meter should have been packaged with a set of premium Fluke silicone test leads.
Date published: 2016-12-12
Rated 5 out of 5 by Troy from Easy to use I have had this meter for years and love it its rugged and dependable and I use it more than my newer fluke
Date published: 2016-12-08
Rated 5 out of 5 by Leo18 from Rugged Meter I bought this meter a few months ago the primary reason why I purchased this model is because of its rugged skin its able to survive use in high humid/hot/rain and constant temperature differences in the Gulf Coast. Very dependable high resolution helps the instrument be more accurate.Also the capability to be used as a bench meter.
Date published: 2016-12-08
Rated 5 out of 5 by dveazie from My new favorite I've used the 80 series for decades but when looking for a new meter for work I came across this one. Just about all of the same functions and features as the 80's but in a rugged case. Brilliant.
Date published: 2016-12-07