Fluke 729 Version Firmware Upgrade | Fluke
English

Fluke 729 Firmware Upgrade

To upgrade your 729 to the latest firmware, follow these simple instructions:

  1. Download Fluke−729 Version firmware upgrade and save the firmware upgrade file.
  2. Ensure your Fluke 729 is connected to your Windows PC computer via USB cable and using the battery charger for power. Run the file and follow the instructions for doing the update. Do not turn off the PC or the 729 while the update is in progress.

Version 0.54 adds the following enhancements:

  1. Allows you to increase the accuracy of automatic pressure calibrations performed using select 750P pressure module under the default pressure range utilizing the built-in controller and pump of the 729
  2. Adds feature that allows you to remotely control the 729 through serial interface commands from bench top applications.
  3. Fixes issue when uploading square root calibration test result to DPCTrack2.
  4. Fixes issue when uploading ad-hoc calibration test result to DPCTrack2.
  5. Fixes issue performing a manual calibration using a 750P pressure module with a pressure rated higher than the 729.
  6. Fixes power on issue caused by overcharged batteries.

Version 0.52 adds the following enhancements:

  1. Improve Square Root functionality for downloaded tasks
  2. Improve “Find Task” functionality in the HART menu

Version 0.51 added the following enhancements:

  1. Added international language selections
  2. Enhanced HART communication
  3. Enhanced User Interface

If you experience any problems during the update, launch the update application and try again. If problems still occur, contact the Fluke Technical Support team or call 1-800-44-FLUKE (1-800-443-5853) for further assistance.

GPL Offer

Chat with ourFluke assistant
Clear Chat