Fluke Ti90 열화상 카메라

단종

주요 기능

The only wireless industrial infrared camera in its price class¹ – take advantage of the benefits of Fluke Connect® by seamlessly gathering and sharing inspection results instantly
Superior image quality, up to 84% better spatial resolution than other competitive models in this price class¹
80 x 60 resolution
Removable 4 GB SD memory card
8 GB Fluke Connect® wireless SD Card
Get context for the infrared image by switching to the full visible (IR-Fusion® AutoBlend™ mode and Picture-in-Picture available in SmartView® software)
2 megapixel built-in digital camera
3.5 in LCD
Smart Battery System - Lithium ion smart battery pack with five-segment LED display to show charge level
Rugged, lightweight, point–and–shoot infrared camera

¹ Class is defined as an industrial handheld infrared camerain the same price range based on MSRP as of May 1, 2014.

제품 설명서 다운로드

이 제품은 단종되었거나 재분류되었습니다.

Fluke 제안 사항:Fluke TiS20 열화상 카메라

무료 데모 받기

제품 개요: Fluke Ti90 열화상 카메라

Stainless steel probe pierces insulation on 14, 16 and 18 gauge wire. You control needle depth to minimize insulation damage. Essential for use under hood or under dash. Use it on fuel injectors or sensors while providing complete insulation to grounding due to design.

Banana jack accepts all DMM and banana jack leads
Non-rotating banana jack prevents leads from tangling, allowing you to tighten/loosen clamp while still connected to the test lead
For use with test leads with 2 mm probes
Tested to 60 V DC

제품 사양: Fluke Ti90 열화상 카메라

Key Features
IFOV (spatial resolution)	5.6 mRad
Detector resolution	80x60 (4,800 pixels)
Field of view	19.5 °H x 26 °V
Minimum focus distance	46 cm (18 in)
Focus system	Focus free (fixed focus)
Wireless connectivity	Fluke Connect™ app compatible with included wireless SD Card¹
IR-Fusion® technology	Only full visible on camera (IR-Fusion® AutoBlend™ mode available in SmartView® software)
Display	3.5 inch diagonal (portrait format)
Design	Rugged, lightweight, ergonomic design for one-handed use
Thermal sensitivity (NETD)	≤ 0.15 °C at 30 °C target temp (150 mK)
Temperature measurement range	-20 °C to +250 °C (-4 °F to +482 °F)
Built-in digital camera (visible light)	2 megapixel industrial performance
Frame rate	9 Hz
Data Storage and Image Capture
Extensive memory options	Removable 4 Gb SD memory card and 8 Gb wireless SD card (where available); direct download via USB-to-PC connection
File formats image	Non-radiometric (.bmp) or (.jpeg) or fully-radiometric (.is2) No analysis software required for non-radiometric (.bmp, .jpg) files
SmartView® software	SmartView® software, Fluke Connect™¹, and SmartView® Mobile App—full analysis and reporting software
Battery
Batteries (field-replaceable, rechargeable)	One lithium ion smart battery pack with five-segment LED display to show charge level
AC battery charging system	In-imager charging. Optional two-bay battery charger or optional 12 V automotive charging adapter
Temperature Measurement
Accuracy	± 2 °C or 2 % (at 25 °C nominal, whichever is greater)
On-screen emissivity correction	Yes (both value and table)
On-screen reflected background temperature compensation	Yes
General Specifications
Color palettes	3 standard: Ironbow, Blue-Red, Grayscale
Drop	Engineered to withstand 2 meter (6.5 feet) drop
Size (H x W x L)	28.4 cm x 8.6 cm x 13.5 cm (11.2 in x 3.4 in x 5.3 in)
Weight (battery included)	0.73 kg (1.6 lb)
Enclosure rating	IP54 (protected against dust, limited ingress; protection against water spray from all directions)
Warranty	Two-years (standard), extended warranties are available
Notes
¹Fluke Connect™ not available in all countries