Fluke Networks CableIQ™ Qualification Tester Kit
Model#: CIQ-KIT Part#: 2388080 UPC#: 7 54082 03196 3
Discontinued
Key features
- Tests and qualifies any copper Ethernet cabling
- Measures network capacity (10/100/1000) for VoIP, data, video
- Troubleshoots length, distance to fault, wire map, opens, shorts, PoE
- Advanced diagnostics: insertion loss, cross talk, noise issues
This product is discontinued or reclassified
Fluke suggests:Fluke Networks LinkIQ™ Cable+Network Tester Advanced Kit
Product overview: Fluke Networks CableIQ™ Qualification Tester Kit
CableIQ works on live copper networks to provide Ethernet switch detection and device configuration. Especially useful in harsh industrial environments, CableIQ tests data rates and quickly finds common cable faults caused by vibration, extreme flexing, moisture, and expansion and contraction from temperature change. It checks continuity on all wires and displays results graphically, so you can see opens, shorts, and crossed wires. CableIQ also reports the distance to an open connection within the cable.
What's in the box:
- CableIQ unit
- Reporter software
- Commonly used accessories
- Duffel bag
Specifications: Fluke Networks CableIQ™ Qualification Tester Kit
| Specifications | |
| Cable types supported | UTP, STP, FTP, SSTP, RG6, RG59, audio and security |
| Qualification autotests | 1000BASE-T, 100BASE-TX, 10BASE-T, VoIP, 1394b S100, TELCO, Wiremap only, Coax |
| Supported tests | Wiremap, length, cable signal performance, digital toner, analog toner, Ethernet port detection and identification, analog telephone detection, blink port light, continuity, speaker test, cable fault finding, video signal detection. |
| Wiremap | Can detect single wire faults and supports MultiMap mode with up to seven remote office identifiers. Draws proportional wire length to breaks. Detects split pairs. |
| Find fault | Measures crosstalk and impedance and compares against appropriate limits based on qualification test selected. Detects location of large point sources as well as distributed sources in the cabling if they are sufficient to disqualify the application |
| Results storage | Up to 250 qualification test results |
| Power | Battery type: 4 AA (NEDA 15A, IEC LR6) alkaline batteries |
| Battery life | 20 hours of typical use, without backlight |
| Other battery types supported | 4AA photo lithium, NIHM, NICAD |
| Dimensions and weight | 7in x 3.5in x 1.75in (17.8cm x 8.9cm x 4.5cm) 1.2 lb (0.55 kg) |
Models: Fluke Networks CableIQ™ Qualification Tester Kit
CIQ-KIT
CableIQ Qualification Tester Kit
Part#: 2388080UPC#: 7 54082 03196 3
Includes:
- CableIQ main unit with remote adapter
- CableIQ Reporter software CD
- IntelliTone 200 Digital Probe
- Remote IDs #2-7
- (2) RJ45-RJ45 patch cord
- USB cable
- Coax 'F' push-on adapter
- 75-ohm coax patch cord
- RJ45/11 universal coupler
- RJ11-RJ11 patch cord
- Owners CD and quick start guide
- (4) AA batteries
- Test accessory soft pouch
- Duffel style bag