AC-stroomtang (3000 A); 915 mm | Fluke
Dutch

AC-stroomtang (3000 A); 915 mm

  • Fluke i3000s Flex-36 AC Current Clamp, 915 mm (36 in.) - 1

Belangrijkste kenmerken

  • Drie meetbereiken: 30 A, 300 A en 3000 A, 1-, 10- of 100 mV/A-uitgang
  • Ideaal voor stroommetingen aan dikke en moeilijk bereikbare geleiders, zonder het circuit te hoeven onderbreken.
  • Maximale diameter geleider 178 mm
  • Veiligheidsspecificatie CAT III 600 V

Ook leverbaar als set van 4 stuks voor gebruik in combinatie met Power Quality Analyzers. Klik hier voor meer informatie.

Productoverzicht: AC-stroomtang (3000 A); 915 mm

De i3000s Flex is een AC-stroomtang die volgens het Rogowskiprincipe werkt. Hij kan gebruikt worden voor stroommetingen tot 3000 A bij gebruik in combinatie met oscilloscopen, recorders of dataloggers. Door de flexibele lichtgewicht meetkop snel en gemakkelijk te installeren op moeilijk bereikbare plaatsen.

Specificaties: AC-stroomtang (3000 A); 915 mm

Electrical Specification
Current ranges30 A
300 A
3000 A
AC rms
Output sensitivity (AC-coupled)100 mV
10 mV
1mV per A
Load impedance100 kΩ minimum
Accuracyat +25°C: ±1% of range (45 Hz to 65 Hz)
Linearity10% to 100% of range: ±0.2% of reading
Noise8 mV AC rms (30 A)
2 mV AC rms (300 A, 3000 A)
Frequency range10 Hz to 50 kHz (-3 dB)
Phase error< ±1° (45 Hz to 65 Hz)
±10° (at 20 kHz)
Position sensitivity (with cable > 25 mm from the coupling)

Position sensitivity: From 1% up to 3% of range with cable, depending on distance from the center (see figure left). Measurements closer than 25 mm from the coupling are typically greater than 3% of range.

External wire influence: 1% (-40 db) of external current >200 mm from head.

External fieldwith cable > 200 mm from the head: ±1% of range
Power supply2 x AA/MN 1500/LR6 Alkaline, 400 hours, low battery indicator
Temperature coefficient±0.08% of reading per °C
Working voltagesee Safety standards section: 600 V AC rms or DC
General Specifications
Head circumference915 mm (36 in.)
Head cable diameter14.3 mm (0.56 in)
Head bend radius38.1 mm (1.5 in)
Cable length (head to electronics)2 m (6.56 ft)
Output connection0.5 m cable terminated with safety BNC connector. Supplied with 4mm safety plug adapter
Operating temperature range-20°C to +90°C (-4°F to 190°F) (head)
-20°C to +85°C (-4°F to 185°F) (electronics)
Storage temperature range-40°C to +105°C (-40°F to 221°F) (head)
-20°C to +85°C (-4°F to 185°F) (electronics)
Operating humidity15% to 85% (non-condensing)
Weight180 g (0.396 lb) (head)
190 g (0.419 lb) (electronics)
Safety standardsBS EN 61010-1: 2001
BS EN 61010-2-032: 2002
BS EN 61010-031: 2002
600 Vrms, Category III, Pollution Degree 2
Use of the probe on uninsulated conductors is limited to 600 V AC rms or DC and frequencies below 1 kHz
EMC standardsEN 61326: 1998 +A1, A2, and A3
Head cable length (double insulated)610 mm or 914 mm, depending on model

Modellen: AC-stroomtang (3000 A); 915 mm

Fluke i3000s Flex 36

AC Current Clamp, 915 mm (36 in.)

Kopen
Chat met onzeFluke-assistent
Chat wissen